# These are the options to dial out to your service provider
# Please customize this file and install it as /etc/ppp/peer/provider.

# You usually need this if there is no PAP authentication.
noauth

# Enable this, if you need the common PAP-password authentication.
# If this does not help, you might also change the system name to
# be like your username.
# The system name is used for authentication, if no "user" directive
# is given.
#user <user>

# name of the remote system
#remotename <x>

# The chatscript (be sure to edit that file too)
connect "/usr/sbin/chat -v -f /etc/chatscripts/provider"

# add a default-route to the ppp-device
# disable this on a server that already has a permanent default route
defaultroute

# Default Modem (you better replace this with /dev/ttySx!)
/dev/modem

# Speed
38400

# Keep Modem up even if connection fails
persist

# demand dialing with 600 seconds (=10 Minutes) idle time disconnects.
# 20 seconds between attempts to connect. This setup implies the "persist"
# option. You might also want to enable ppp on boot up so you wont have to
# worry about the ppp connection at all.
#demand idle 600 holdoff 20

