

Snd-ls v0.9.8.17
-------------------
Released 2008-07-06



Contains
--------
Snd v9.3 from 30.7.2007




About
-----
Snd-ls is a distribution of the sound editor Snd. Its target is
people that don't know scheme very well, and don't want
to spend too much time configuring Snd. It can also serve
as a quick introduction to Snd and how it can be set up.



Install
-------
1. Edit the file config.scm, for configuration settings.
2. Run ./build
3. Run ./install (as root, if needed).

It is not necessarry to uninstall any previously installed versions of
SND or Snd-ls. Snd-ls does not interfere with already installed versions of SND.
After installing, the name of the executable is "snd-ls".

If a previous version of Snd-ls is already installed, the old version will be
overwritten. It is not necessary to uninstall the old version before installing
a newer one.

To uninstall, run ./uninstall



Required packages
-----------------
guile
gtk-2
jack
libsamplerate
libsndfile
ladspa
liblrdf
fftw3
libxt-devel

(guile-devel, gtk-2-devel, liblrdf-devel, jack-devel, libsndfile-devel and ladspa-devel are also needed at runtime)




Changes
-------

0.9.8.16 -> 0.9.8.17
-(read-enable 'positions) has been wrongfully
 turned off for some time. Bactrace should work
 again now. (This only affects people using
 snd-ls for programming.)


0.9.8.15 -> 0.9.8.16
-Fixed definstrument and faust.


0.9.8.14 -> 0.9.8.15
-Removed deprecated CAIRO_FONT_TYPE_ATSUI


0.9.8.13 -> 0.9.8.14
-Updated <slider> in snd-rt, <slider> in gui.
 (bugs reported by "border")
-Fixed definstrument.
-Replaced jack_client_new with jack_client_open


0.9.8.12 -> 0.9.8.13
-Updated Snd-Rt. (unguote-splicing, gui)


0.9.8.11 -> 0.9.8.12
-Updated Snd-Rt. (gui, dynamic scoping, oscil* etc.)


0.9.8.10 -> 0.9.8.11
-Updated Snd-Rt. (timer)


0.9.8.9 -> 0.9.8.10
-Updated Snd-Rt. (timer, faust, definstrument)


0.9.8.9 -> 0.9.8.9
-Updated Snd-Rt. Faust support.


0.9.8.7 -> 0.9.8.8
-Fixed rt timer. Previously it only ran 3 hours
 before giving negative numbers. Now it should
 run approx. 13 million years. (not tested)


0.9.8.5 -> 0.9.8.7
-Removed access to removed functions in jack.


0.9.8.5 -> 0.9.8.6
-Updated eval-c.scm.


0.9.8.4 -> 0.9.8.5
-Updated Snd-rt.
-Fixed player
-Fixed append


0.9.8.3 -> 0.9.8.4
-Updated Snd-rt.


0.9.8.2 -> 0.9.8.3
-Screwed up the rt_readin_tag fix by adding the wrong file. Big thanks to "edu" for reporting the problem so quickly.


0.9.8.1_beta -> 0.9.8.2
-The rt_readin_tag startup bug is finally fixed. Thanks to Josh Lawrence, Luke Hammon,
 Martin Rumori and Renick Bell for helping me finding it.
-Improved the build system a bit.
-Guile >=1.8.0 is now required to build and run Snd-ls.


0.9.8.0_beta -> 0.9.8.1_beta
-Fixed bug that caused snd to fail starting if no previously used soundfile was opened during
 startup.


0.9.7.12 -> 0.9.8.0_beta
-Updated Snd from 8.4/12.9.2006 to 9.3/30.7.2007. Many important fixes.
-Another attempt at fixing the rt_readin_tag startup.


0.9.7.11 -> 0.9.7.12
-Fixed listener.
-Removed various debug printing.
-added --without-builtin-gtkrc configuration option.


0.9.7.10 -> 0.9.7.11
-Downgraded Snd from 8.4/26.9 back to 8.4/12.9 again. That upgrade was a mindless mistake.
-Copied all files from my private snd three into snd-ls. Hopefully, this should make everything
 work again.
-Added fix to make jackdmp work with standard installation of guile.


0.9.7.7 -> 0.9.7.10
-Don't quit snd-ls in case file can't be opened during startup. Bug reported by Dragan
 Noveski.
-Disable FAM for now, because it fails for no reason during startup. Problem reported
 by Dragan Noveski.


0.9.7.6 -> 0.9.7.7
-Seems like the full menu patch was missing for all versions after 0.9.7.0, causing
 cutting (and probably other things) not to work.


0.9.7.5 -> 0.9.7.6
-Proper debug output in case startup fails.
-Fixed bug in jack audio.


0.9.7.4 -> 0.9.7.5
-Temporary remove the fft menu because its not working with the 26.9.2006 version
 of Snd. Bug found by Dragan Noveski.


0.9.7.3 -> 0.9.7.4
-Check for the existence of the sndfile.h header file before compiling.
 If it doesn't exist, snd-ls will refuse to run. Problem reported by
 Krzusztof Gawlas.


0.9.7.2 -> 0.9.7.3
-Make sure snd starts up even if no file was loaded during startup. Bug
 found by Dragan Noveski.


0.9.7.1 -> 0.9.7.2
-Really apply the workaround for the menu problem.


0.9.7.0 -> 0.9.7.1
-Updated Snd from 8.4/13.9 to 8.4/26.9. Many important fixes.
-Added workaround for menu problem. Bug found by Dragan Noveski.
-Added check that initialization is complete.
-Some realtime fixes.


0.9.6.2 -> 0.9.7.0
-Updated Snd from 8.0/2.4 to 8.4/13.9. Many important fixes.
-Added --fast-math as default cflags option.
-Various fixes.


0.9.6.1_beta -> 0.9.6.2
-Moved the dac size slider into the options menu.
-Hide listener on startup.
-Removed marks stuff from popup menu. (Incompatible with snd_conffile.scm)


0.9.6.0_beta -> 0.9.6.1_beta
-Updated Snd from 8.0/30.3 to 8.0/2.4. Many important fixes, including listener stuff.
-Removed playing buttons from pop-up menues.
-Added checks for gtk-mnemnomnics so that old key-bindings aren't overwritten.
-Many fixes for the rt-player.
-Various fixes so that debug printing and warnings/errors are put out to the listener as well as
 stdout/stderr.
-Configured the transform view to show sonograms by default.
-Increased standard dac-size from 1024 to 2048.
-Added shortcut "l" to turn on/off the listener, and added it to the
 help menu along with the "c" key for turning on/off controls.


0.9.5.5 -> 0.9.6.0_beta
-Updated Snd from 7.15 to 8.0.
-Enabled rt-player by default. rt-player is an alternative player engine
 for snd, that plays using the rt-extension and reads data from disk through
 a ringbuffer. The result is less clicks.


0.9.5.4 -> 0.9.5.5
-Reenabled code in the configure script to check for liblrdf. Thanks to 
 Andres Cabrera for pointing this out.
-Simplifed the ladspa stuff. It now works with guile 1.8, use a lot less
 time to start, and more than one instance of the same ladspa plugin can
 be run at once.
-Removed check code for guile earlier than 1.8. It now works with guile 1.8.
-Added code to cache compiled object files. This reduces startup time a lot.
-Updated rt-stuff to latest version.
-Fixed that pressing any of the control on/off buttons also started playing.
-Included GTK mnemonics code from Maxim Krikun.
-Print debug info to stdout when something goes wrong in a hook or timed
 callback.
-Backported Bill's fix for segfaulting when changing filter order when
 playing. Bug found by Tim Blechman.
(-The included diff-file between SND v7.15 vs. SND-ls is now 108000 bytes. Probably time
  to move on to SND v7.20.)


0.9.5.3 -> 0.9.5.4
-Changed default resampling quality to SRC_SINC_BEST_QUALITY
-Added workaround for shift-handling across various keyboard settings.
 (zoom in and undo should work with american keyboards now.)
-Added check for Guile 1.8. Snd-ls crashes with guile 1.8.
 (all versions I have tried of 1.7 seems to work though...)
-Use JackPortIsPhysical instead of "alsa_pcm" when finding jack ports.
-Updated the rt stuff to latest versions.

0.9.5.2 -> 0.9.5.3
-Reduced the startup-time radically.
-Reduced memory usage.
-Realtime priority when playing when using jack.
-Fixed window auto-sizing.

0.9.5.1 -> 0.9.5.2
-Turned off off-turning of mlockall(MCL_FUTURE) to avoid being zombified from jack.
-Fixed some things in rt-compiler.scm and snd_conffile.scm

0.9.5.0_beta -> 0.9.5.1
-Upgraded SND to V7.15 from 17.8.2005. Many important changes.
-Various improvements in the user-interface.


0.9.4.3 -> 0.9.5.0_beta
-Upgraded snd to V7.15 from 12.8.2005. Many important changes.
-Various other things.


0.9.4.2 -> 0.9.4.3
-Upgraded various rt-stuff.


0.9.4.1 -> 0.9.4.2
-Upgraded various rt-stuff++


0.9.4.0 -> 0.9.4.1
-Removed jack_set_server_dir guile-binding from rt-engine.scm, because its removed from the newer
 versions of jack.


0.9.3.0 -> 0.9.4.0
-Updated SND to v7.14 from 19.6.2005. Many important changes.


0.9.2.0 -> 0.9.3.0
-Updated SND to v7.13 from 18.5.2005. Many important changes.
-Fixed a small error in the installation script.


0.9.2-beta1 -> 0.9.2.0
-Updated SND to v7.10 from 20.1.2005. Many important changes.


0.9.1.5 -> 0.9.2-beta1
-Updated SND to v7.8 from 12.8.2004. Many important changes.


0.9.1.4 -> 0.9.1.5:
-Made the apply-button always apply to selection if there is a selection.


0.9.1.3 -> 0.9.1.4:
-Removed some options from the edit-menu that interfered with the way snd_conffile works.


0.9.1.2 -> 0.9.1.3:
-Made the insert-option in the edit-menu insert monofiles into the currently selected channel.
-Added libxt-dev to the list of required packages. (Thanks to robin)
-Made mono-files play in both left and right channel when using Jack.


0.9.1.1 -> 0.9.1.2:
-Short fix for the nodeline-class.


0.9.1 -> 0.9.1.1:
-Fixed Append File edit-menu option.
-Workaround for trouble with ladspa default settings.


0.9.0 -> 0.9.1:
-Official announced.
-Upgraded SND from 20.7.2004 to 2.8.2004
-Huge amount of testing at Notam by 14 unexperienced guinea pigs for
 a whole week; many bugs fixed.


Links
-----
Snd: http://ccrma.stanford.edu/software/snd/
Guile: http://www.gnu.org/software/guile/guile.html



Credits
-------
Snd is made by Bill Schottstaedt. This small package is put
together by Kjetil Matheussen / Notam, with consulting
help from Bill Schottstaedt.
